No, an Eufy surveillance camera requires an internet connection to record and store footage. Without an internet connection, the camera will not be able to save any recordings. Additionally, an internet connection is necessary for accessing the live feed and receiving alerts on your mobile device. **

The Eufy G10 Hybrid can be used for mopping by attaching the mopping module to the robot vacuum. The mopping module has a water tank and a mopping cloth that can be filled with water and attached to the bottom of the vacuum. Once attached, the vacuum can be programmed to mop specific areas or entire rooms, and it will navigate around obstacles while mopping. The mopping cloth will dampen and clean the floor as the vacuum moves, providing a convenient and efficient way to keep floors clean. **

To use the Eufy G10 Hybrid for mopping, you first need to attach the mopping module to the robot vacuum. Fill the water tank with clean water and attach it to the mopping module. Then, select the mopping mode on the EufyHome app or on the robot vacuum itself. The robot will then navigate your home and mop the floors, leaving them clean and shiny. **

The eufy camera may be offline due to a loss of internet connection or power outage at the location where the camera is installed. If you are not there to troubleshoot the issue, you can try restarting the camera remotely through the eufy app or contacting someone who is at the location to check the camera's power source and internet connection. It is also possible that there may be a technical issue with the camera itself that requires further investigation. **

To apply a new waterproofing membrane on top of an old bitumen waterproofing membrane, the surface of the old membrane should be thoroughly cleaned and prepared. Any loose debris, dirt, or old adhesive should be removed to ensure proper adhesion of the new membrane. Once the surface is clean, a primer should be applied to promote adhesion between the old and new membranes. Finally, the new waterproofing membrane can be installed according to the manufacturer's instructions, ensuring that it is properly sealed and bonded to the old membrane to provide effective waterproofing. **

A utility knife or a sharp blade is typically used to cut the waterproofing membrane. It is important to use a sharp tool to ensure clean and precise cuts, which will help in achieving a proper seal and prevent water leakage. Care should be taken to avoid damaging the underlying surface while cutting the membrane. **

Ideally, the waterproofing membrane should be applied in dry weather to ensure proper adhesion and effectiveness. If the membrane is applied and then it rains before it has fully cured, it can compromise its ability to create a watertight seal. Water exposure during the curing process can lead to delamination, reduced adhesion, and potential leaks. Therefore, it is best to apply the waterproofing membrane when there is no rain in the forecast and allow it to fully cure before any water exposure. **

When using acrylic paint for painting, it is important to use pens that are specifically designed for use with acrylics. Some popular options include acrylic paint pens, acrylic markers, and acrylic ink pens. These pens are designed to be sealant-resistant, meaning they will not smudge or bleed when a sealant is applied over the painted surface. Look for pens that are labeled as waterproof, fade-resistant, and suitable for use on a variety of surfaces to ensure the best results for your acrylic painting projects. **