To apply a new waterproofing membrane on top of an old bitumen waterproofing membrane, the surface of the old membrane should be thoroughly cleaned and prepared. Any loose debris, dirt, or old adhesive should be removed to ensure proper adhesion of the new membrane. Once the surface is clean, a primer should be applied to promote adhesion between the old and new membranes. Finally, the new waterproofing membrane can be installed according to the manufacturer's instructions, ensuring that it is properly sealed and bonded to the old membrane to provide effective waterproofing. **

The demand curve represents the relationship between the price of a good or service and the quantity demanded by consumers. It slopes downward from left to right, showing that as the price decreases, the quantity demanded increases. On the other hand, the supply curve represents the relationship between the price of a good or service and the quantity supplied by producers. It slopes upward from left to right, indicating that as the price increases, the quantity supplied also increases. Both curves are essential in understanding how prices are determined in a market economy. **

The curve shown in the image is a cosine curve, which is similar to a sine curve but with a phase shift of 90 degrees. This means that the cosine curve starts at its maximum value when the sine curve is at its zero point, and vice versa. Additionally, the cosine curve has the same periodicity and amplitude as the sine curve, but it is shifted to the right by 90 degrees. Overall, the main difference between the two curves is the phase shift. **

PVC (polyvinyl chloride) can curve due to its inherent flexibility and elasticity. When PVC is heated, it becomes more pliable and can be easily shaped into curves or bends. Once the heated PVC cools down, it retains the curved shape. This property makes PVC a versatile material for a variety of applications where curved or flexible components are needed. **

A utility knife or a sharp blade is typically used to cut the waterproofing membrane. It is important to use a sharp tool to ensure clean and precise cuts, which will help in achieving a proper seal and prevent water leakage. Care should be taken to avoid damaging the underlying surface while cutting the membrane. **

The curve in the back appears to be a round back rather than a normal curve. A round back is characterized by a more pronounced curve in the upper back area, often leading to a hunched or rounded posture. This can be caused by factors such as poor posture, muscle imbalances, or spinal conditions. It is important to address a round back to prevent further issues and improve overall posture and spinal health. **

Movement on the curve refers to changes in quantity demanded or supplied in response to changes in price, while movement of the curve itself refers to shifts in the entire demand or supply curve due to changes in factors other than price. Movement on the curve is caused by changes in price, resulting in a change in quantity demanded or supplied, while movement of the curve is caused by changes in factors such as income, preferences, or technology, resulting in a shift of the entire demand or supply curve. Understanding both types of movement is crucial for analyzing the impact of various economic factors on market equilibrium and prices. **

Ideally, the waterproofing membrane should be applied in dry weather to ensure proper adhesion and effectiveness. If the membrane is applied and then it rains before it has fully cured, it can compromise its ability to create a watertight seal. Water exposure during the curing process can lead to delamination, reduced adhesion, and potential leaks. Therefore, it is best to apply the waterproofing membrane when there is no rain in the forecast and allow it to fully cure before any water exposure. **